Skip to content
Short Brand Reviews
Online Marketplaces · Guide

How to Buy a Water Butt Online in the UK: Size, Taps and Siting

Water butts look like the easiest online buy going — until the diverter doesn't fit your downpipe and the tap sits too low for a watering can. Here's what to check before you order.

Harriet ColesEditorial team
November 16, 2026
6 min read
Two individuals filling a watering can with a hose in a vibrant garden setting, perfect for spring.

Photo: Yaroslav Shuraev / Pexels

Start with your downpipe, not the butt

Most water butts arrive as a tub with a tap on the side and very little else. The clever bit — the diverter that takes water out of your downpipe and into the butt — is usually sold separately, and it only fits certain pipe shapes.

So before you look at a single listing, go outside with a tape measure. Note whether your downpipe is round or square, and measure its width. Round pipes are fairly predictable. Square ones vary more than you'd think, and a diverter that doesn't fit is a return you'll be paying for.

Also check which side of the house the downpipe is on, and whether the ground beside it is flat. A butt on a slope will lean, and a leaning butt is a wobbly, leaking butt.

Work out the size and shape you can live with

Capacity

Capacity is given in litres, and bigger is not automatically better. A full butt is genuinely heavy — heavy enough that you won't want to move it once it's in place, and heavy enough to matter if it's sitting on soft ground or decking.

Think about what you're actually watering. A few pots and a hanging basket need far less than a full border or a veg patch. In a small garden, a slimline butt tucked against a wall often beats a huge one that eats the path.

Footprint and clearance

Measure the gap between the wall and whatever is on the other side — a path, a fence, a gate. Then add room to lift the lid off and to get a watering can underneath. That last bit catches people out constantly.

Tap height

The tap on most butts sits close to the base, which means a watering can won't fit under it once the butt is standing on the ground. Either buy a stand, or choose a butt designed to sit raised. Check whether the stand comes in the box or is a separate purchase, because it usually is.

The extras that rarely come included

Before you order, list everything you'll need and put it in one basket. Chasing a missing connector a fortnight later is a miserable way to spend a Saturday.

  • A diverter kit that matches your downpipe shape and size
  • A stand or base, if you want gravity to do the work
  • An overflow pipe, so excess water goes somewhere sensible
  • A linking kit, if you plan to run two butts together
  • A mesh filter or leaf guard for the inlet
  • A hose connector for the tap, if you'd rather not use a can

Reading the listing like a sceptic

Dimensions versus capacity

Some listings give you height and diameter, some give capacity and nothing else. You need both. A tall, narrow butt holds less than you'd guess from the photo.

Material and thickness

Thin plastic goes brittle after a couple of winters and turns green inside. Look for UV-stabilised walls and a decent wall thickness. Recycled plastic is fine here — often better, in fact, and it's a sensible use of the stuff.

The tap

A basic spigot is fine for filling a can but useless for a hose. If you want to run a hose, check the tap takes a standard connector. Also check it's a proper tap with a washer you can replace, not a sealed unit you'll have to bin.

The lid

It should sit flush and stay put. Standing water plus small children is a genuine risk, so a secure, ideally lockable lid matters more than most listings let on.

Assembly

Some butts arrive as flat panels you clip together. That's fine, but check whether you need tools and whether one person can manage it.

Delivery: the part people forget

A water butt is a bulky item, and bulky items are usually left at the kerbside or on a pallet rather than carried round the back for you. Read the delivery notes on the listing before you pay.

Have a think about access. Will a pallet truck get through the gate? Is there gravel, a step, or a narrow side return? Can you get a second pair of hands on the day? A butt is awkward rather than impossible, but awkward plus wet weather plus a tight passage is a bad combination.

Then there's the packaging — usually a lot of cardboard and shrink wrap. Flatten it and check what your council collects.

Returns: measure twice, order once

Large items are a pain to send back, and you'll often be the one arranging it. Two things to check before ordering: whether the seller collects bulky returns or expects you to sort a courier, and whether the original packaging needs to be intact.

Keep the box and the wrap until the butt is sited, connected and holding water. If the diverter turns out to be the wrong shape, you want the option to send the whole thing back rather than improvise with tape and hope.

Siting it so it actually earns its keep

  • Stand it on firm, level ground, or on a proper base if the ground is soft
  • Put it as close to the downpipe as you can, so the diverter run is short
  • Raise it on a stand if you want any useful pressure through a hose — a butt at ground level trickles
  • Keep it in shade where possible; sunlight and standing water grow algae
  • Point the overflow away from the house, away from next door's path, and away from your own foundations
  • Don't block a path, a gate or a fire escape

Hosepipe bans and what the rules actually say

This is the bit people get wrong. Restrictions vary by water company and by year, and they're not identical. Most allow you to fill a watering can from a water butt you've collected rainwater in, but some are stricter than you'd expect, and rules can change mid-season.

Check your supplier's own guidance rather than a forum thread from three summers ago. It takes two minutes and saves an awkward conversation over the fence.

Keeping it usable through the year

Autumn is the maintenance moment: clear leaves off the mesh, check the diverter isn't blocked, and make sure the overflow is running freely.

In winter, leave some headroom so ice has somewhere to expand, or drain it down if a hard frost is forecast. In spring, give it a rinse, check the tap washer, and clear any sludge from the bottom.

Keep the lid on all year. It cuts algae, keeps out leaves, and stops it becoming a wildlife trap.

A quick checklist before you pay

  • Downpipe shape and width measured
  • Space beside the downpipe measured, including clearance for the lid and a can
  • Capacity matched to what you actually water
  • Diverter, stand, overflow and connector either included or added to the basket
  • Delivery notes read, and access checked
  • Return arrangements understood for a bulky item
  • Ground level and firm

Verdict

A water butt is one of the better-value bits of kit you can add to a UK garden, but only if you do the measuring first. Get the downpipe size, the footprint and the tap height right, and it'll quietly fill itself for years. Get them wrong and you'll be wrestling a half-full tub back to the kerbside — which is exactly the sort of return nobody enjoys.

Keep reading